Mindray DPM 1 Instrukcja Operatora Pobierz pdf (Strona 58)

5-8

When any of the SpO

or PR values exceeds the alarm limits, an alarm will be triggered.

The ranges of SpO

and PR limits are listed below:

SpO

module SpO

Mindray DS SpO

0 to 100％

0 to 254 bpm

Masimo SpO

0 to 100％

25 to 240 bpm

Nellcor SpO

0 to 100％

20 to 250 bpm

5.6 SpO

Sensor Off Alarm

Select SYSTEM SETUP→MAINTAIN→USER MAINTAIN; enter required password

and set SPO2 SENSOR OFF to HIGH, MED, LOW or OFF in the pop-up menu. When the

alarm level of SPO2 SENSOR OFF is set to OFF, all alarm indications related to this alarm

is disabled.

5.7 When an Alarm Occurs

WARNING

 When an alarm occurs, always check the patient’s condition first.

When an alarm occurs to the monitor, refer to the following steps and take action properly.

1. Check the patient’s condition.

2. Identify the alarming parameter and the alarm category.

3. Identify the cause of the alarm.

4. Take proper action to eliminate the alarm condition.

5. Make sure the alarm condition is corrected.

NOTE

 For details about how to deal with specific alarms, refer to C Alarm Messages

and Prompt Information.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 119 120

Brak uwag

Mindray DPM 1 Instrukcja Operatora Strona 58